Additional Duty 170 | Type I
Our AD-170 and AD-180 bodies are the largest, strongest and most adaptable ambulance and rescue vehicles you'll find at the scene of an emergency. They are packed with design and safety features to help you do your job better than ever.
Chassis
- International DuraStar 4100 / 4300 / 4400, Freightliner M2, Ford F-650, GM 4500 Cutaway, Sterling Acterra
- 4x4 available on some chassis, inquire for details
Electrical
- Circuit Board: Printed circuit board with automatic reset circuit breakers; a complete set of relays and circuit breakers are mounted in the electrical cabinet as spares
- Heat / Cool: A combination heating and cooling unit installed over the walk-through or pass-through window with 3-position mode selector switch and thermostat on rear control panel (Optional severe climate thermal package available, ducted system also available)
- 3 - 115-volt hospital grade duplex outlets with GFI protection
- Shoreline: 115-volt 20amp twist-lock power inlet with watertight cover; with mating plug
- 2 - 12-volt power point-style outlets; Schottky diode to isolate medical equipment
- Multiplexed electrical systems are also available
Body
- Headroom: 72" floor to ceiling, with optional increased headroom available
- Flooring: Non-slip Lonplate II, with 5" rollup
- Compartments: .100" bright aluminum diamond plate walls; .125" smooth aluminum floors
- Body Construction: Structural members are 2"x2"x.125" aluminum tubes at 12" on center for sidewall verticals, roof cross members, and floor cross members; sidewall skin is .125" aluminum sheet; roof skin is a .090" 1-piece aluminum sheet; floor vapor barrier is a .090" 1-piece aluminum sheet; doorjambs are formed integral in the sidewall
- Side Entry Stepwell: .125" ADP dual step side entry stepwell
- Door Construction: One-piece, form rolled, compartment and entry doors with 24 bends to form a minimum 2.75" thick door. Tri-Mark heavy duty locking paddle handles with 2-point double latching on all compartment and entry doors
- Rear Bumper / Step: Steel subframe bumper, flip-up center section with high grip surface, cast aluminum endpods
- Rubrails: All aluminum C-channel style
- Rear Kickplate / Stone Guards: Brushed stainless steel
Emergency Lights
- Intersection Lights: 2 Whelen 400 series halogen lights with red lenses, vary based on chassis choice
- Front Lightbar: 58" with customer choice of lens colors
- Load Lights: 2 Opti-Scene 8°-32° lights
- Scene Lights: 4 Opti Scene 8°-32° lights
- Siren: 200-watt remote siren; 1 siren/horn selector switch
- Speakers and Lights: Speakers mounted under the bumper; 2 Whelen 700 Series halogen lights with red lenses
- Warning Lights: KKK-A-1822 lighting with matching flash pattern; 8 Whelen 900 Series halogen lights with red lenses; 1 Whelen 900 Series halogen light with clear lens (cancels in secondary mode); 1 Whelen 900 Series halogen light with amber lens (flashes in secondary mode); front clear light and rear amber light flash together with insector and speaker lights
- Stop / Tail / Turn Lights: LED, halogen reverse lights
Cabinets and Hardware
- IV Holders: 4 recessed IV holders
- Attendant's Seat: High-back captain's chair with left-side armrest and swivel base; vacuum-formed upholstery
- Cabinets: Sliding doors; adjustable shelves; sealed interior corners for easy clean up; cabinet faces have picture-framed windows with mitered corners; tinted acrylic doors; full-length extruded aluminum pull handles; 5" radius safety corners
- Writing Tray: Versatile roll-out tray with storage for laptop computer or clipboards
- Squad Bench: Seamless vacuum-formed cushions and upholstery, split lids with storage below; gas-prop style hold opens (lid automatically opens when latch is released); stainless steel paddle latches to hold lids securely closed; seatbelts for seated and supine positions
- Optional curbside action seat configurations available with 5-point safety harness, in lieu of a traditional squad bench - see representative for details
Oxygen/Vacuum
- Oxygen and Vacuum Outlets: 2 Ohio-style oxygen outlets and one vacuum outlet
- Oxygen Cylinder Mount: Adjustable stainless steel rings for M-size cylinder, located in the streetside front compartment
- Vacuum and Suction System: Thomas brand vacuum pump in streetside intermediate compartment; on/off switch, flow regulator and disposable canister mounted on action wall
|
| View Video: High | Medium |
| AD-170 Type I Brochure |
| AD-170 Type I Drawing |
| |
Registered Dealer for Southern California
For more information, contact
Geoff Maze
geoff@responsevehiclesolutions.com
Office: 818-780-6272
Cell: 818-738-4584 |



|