HOME
    PRODUCTS
       » Ambulances
       » GEM Cars
       » Chief & EMS Conversions
       » Re-Conditions Police Vehicles
       » Used Inventory
    VIDEOS
       » Day in the Life
       » Public Service
       » Comparsion
    SERVICES
    ABOUT US
    CONTACT US
    LINKS
  RVS PRODUCTS - MEDTEC Field Duty 146
 
Field Duty 146 | Type III

The smaller FD-146 is a compact-sized, high feature Type III with plenty of storage and patient care configurations. This unit is perfect for urban or rural use where streets are narrow and access is limited.
Chassis
  • GM G-Series -  139" DRW Cutaway, 12,300 GVWR, 6.6L DuraMax Diesel, YF2 Ambulance Prep Package, AM/FM/CD, White, Premium Interior Trim   
  • FD-146 - 146" x 90" Ambulance Body

Electrical

  • Circuit Board: Printed circuit board with automatic reset circuit breakers; a complete set of relays and circuit breakers are mounted in the electrical cabinet as spares
  • Heat/Cool: A combination heating and cooling unit installed over the walk-through with 3-position mode selector switch and thermostat on the rear control panel; two automatic gate valves to shut off hot water from engine when in air conditioning mode; all heater hoses are EDPM Nomex material
  • 3 - 115-Volt hospital grade duplex outlets with GFI protection
  • Shoreline: 115-volt 20amp twist-lock power inlet with watertight cover; with mating plug
  • 2 - 12-Volt power point-style outlets; Schottky diode to isolate medical equipment
Body
  • Headroom: 64" floor to ceiling (66" headroom optional)
  • Flooring: Non-slip Lonplate II
  • Compartments: .090" smooth aluminum wall construction; .125" smooth aluminum floors
  • Body Construction: Structural members are 1"x2"x.125" aluminum tubes at 12" on center for are used for floor cross members; .125" aluminum sidewall skin; .090" one-piece aluminum floor vapor barrier; doorjambs are formed integral to the .125" sidewall skin
  • Door Construction: One-piece, form rolled, compartment and entry doors with 24 bends to form a minimum 2.75" thick door. Tri-Mark heavy duty locking paddle handles with 2-point double latching on all compartment and entry doors
  • Side Entry Stepwell: .125" ADP single step side entry stepwell
  • Fenderettes: Black rubber
  • Rear Bumper/ Step: 8" open grate flip-up center section with ADP endpods
  • Rubrails: Black rubber
  • Rear Kickplate/Stone Guards: Aluminum Diamond Plate
  • Running Boards: ADP cab running boards taper out to meet the module body rubrails
  • Thresholds: rear entry d doors - 6" brushed stainless steel floor plate threshold; side entry door - three-piece brushed stainless steel floor plate threshold; walk-through - brushed stainless steel floor plate threshold

Emergency Lights

  • Intersection Lights: 2 Whelen 700 series halogen lights with integral Whelen flanges and red lenses
  • Front Lightbar: Flush mounted lightbar, 77" 3 - halogen flashers and 2 - rotators; customer choice of lens colors
  • Load Lights: 2 Whelen 900 Series Opti-Scene 8°-32°
  • Scene Lights: 2 Whelen 900 Series Opti Scene 8°-32°
  • Siren: 200-watt remote siren; 1 siren/horn selector switch
  • Speakers and Lights: Siren speakers recessed into the bumper; 1 Whelen 700 Series halogen forward facing lights with red lenses
  • Warning Lights: KKK-A-1822 lighting with matching flash pattern; 6 Whelen 900 Series halogen lights with red lenses; 1 Whelen 900 Series halogen light with amber lens (flashes in secondary mode); rear amber light flash together with insector and forward-facing lights

Cabinets and Hardware

  • ALS cabinet: Full-height double doors with handles, roller-ball catches and two adjustable shelves
  • Assist Rails and Armrest: 1 - 70" polished stainless steel rail over cot; 1" diameter stainless steel 45° ergonomic style assist handles on each patient entry door
  • Cabinets: Standard cabinets include: sharps container and bracket, biohazard container with lid and red biohazard bags. Shelves feature infinitely adjustable C-channel mounting tracks; interior corners are sealed for easy cleaning; faces feature framed windows with mitered corners; cabinet doors are tinted acrylic
  • Cot Mount: Stryker #6370 single position mount; customer to specify cot model for proper positioning of mount
  • IV Holders: 2, recessed style, in ceiling 
  • Compartment Deck: Black Dri-Deck vented plastic tile on the compartment floors
  • Formica: Customer choice of standard colors for interior
  • Lights, Dome: 8 - dual bulb high/low halogen/incandescent lights; 1 high/off/low switch in the rear console for each bank of lights; three-minute time delay system activated by the entry doors
  • Work Light: Fluorescent light with integral switch above the primary action area
  • Sliding Door: Solid wood door on a slide track to separate the patient compartment and the cab; fixed acrylic tinted window in door; door slides behind driver seat
  • Squad Bench: Split lids with storage below; double cushions fastened with Velcro; gas-prop style hold opens (lid automatically opens when latch is released); stainless steel paddle latches to hold the lids closed in the event of an accident; 3 seatbelts for seated and supine positions
  • Technician's Seat: Bench style seat with a swing open backrest for access to the electrical cabinet

Oxygen/Vacuum

  • Oxygen and Vacuum Outlets: 2 Ohio-style oxygen outlets and one vacuum outlet
  • Oxygen Cylinder Mount: Adjustable stainless steel rings for M-size cylinder, located in the streetside front compartment
  • Oxygen Flowmeter: 1 gravity type provided
  • Vacuum and Suction System: Thomas brand vacuum pump in streetside intermediate compartment; on/off switch at rear console; aspirator with disposable canister mounted on action wall



View Video: High | Medium
Field Duty Van Drawing
 
Registered Dealer for Southern California
For more information, contact

Geoff Maze
geoff@responsevehiclesolutions.com
Office: 818-780-6272
Cell: 818-738-4584