HOME
    PRODUCTS
       » Ambulances
       » GEM Cars
       » Chief & EMS Conversions
       » Re-Conditions Police Vehicles
       » Used Inventory
    VIDEOS
       » Day in the Life
       » Public Service
       » Comparsion
    SERVICES
    ABOUT US
    CONTACT US
    LINKS
  RVS PRODUCTS - MEDTEC PD-146
 
Professional Duty 146 | Type I

The PD-146 is a conventional size, full-featured ambulance.  Popular in large municipal fleets, this premium unit is also sought after in rural EMS and rescue.

Chassis
  • Ford F-350 XLT 165" Wheelbase DRW Cab/Chassis, 13,000 GVWR, 6.4L Powerstroke Diesel Engine, #47A Ambulance Prep Package, AM/FM/CD, Oxford White
  • (F-450, F-550 and 4x4 configurations optional)
  • 146" x 94" Conversion
  • Pass-through (standard) or walk-through style (optional)

Electrical

  • Circuit Board: Printed circuit board with automatic reset circuit breakers; a complete set of relays and circuit breakers are mounted in the electrical cabinet as spares
  • Heat/Cool: A combination heating and cooling unit installed over the walk-through or pass-through window with 3-position mode selector switch and thermostat on rear control panel (Optional severe climate thermal package available, ducted system also available)
  • 3 - 115-volt hospital grade duplex electrical outlets with GFI protection
  • Shoreline: 115-volt 20 amp twist-lock power inlet with watertight cover; with mating plug
  • 2 - 12-volt power point-style outlets; Schottky diode to isolate medical equipment
  • Multiplexed electrical systems are also available
Body
  • Headroom: 66" floor to ceiling (on F-450: only 68" or 72" headroom optional)
  • Flooring: Non-slip Lonplate II, with 5" roll-up 
  • Compartments: .100" bright aluminum diamond plate walls; .125" smooth aluminum floors
  • Body Construction: Structural members are 2"x2"x.125" aluminum tubes at 12" on center for sidewall verticals, roof cross members, and floor cross members; sidewall skin is .125" aluminum sheet; roof skin is a .090" 1-piece aluminum sheet; floor vapor barrier is a .090" 1-piece aluminum sheet; doorjambs are formed integral in the sidewall
  • Side Entry Step Well: .125" ADP single step side entry step well
  • Door Construction: One-piece, form rolled, compartment and entry doors with 24 bends to form a minimum 2.75" thick door. Tri-Mark heavy duty locking paddle handles with 2-point double latching on all compartment and entry doors
  • Rear Bumper / Step: Steel subframe bumper, flip-up center section with high grip surface, cast aluminum endpods
  • Rubrails: All aluminum C-channel style
  • Rear Kickplate / Stone Guards: Brushed stainless steel

Emergency Lights

  • Intersection Lights: 2 Whelen 700 series halogen lights with red lenses
  • Front Lightbar: 58" with customer choice of lens colors
  • Load Lights: 2 Opti-Scene 8°-32° lights
  • Scene Lights: 4 Opti Scene 8°-32° lights
  • Siren: 200-Watt siren controls and siren/horn selector switch; 2 - 100-watt siren speakers
  • Speakers and Lights: Speakers mounted under the bumper; 2 Whelen 700 Series halogen forward-facing lights with red lenses
  • Warning Lights: KKK-A-1822 lighting with matching flash pattern; 8 Whelen 900 Series halogen lights with red lenses; 1 Whelen 900 Series halogen light with clear lens (cancels in secondary mode); 1 Whelen 900 Series halogen light with amber lens (flashes in secondary mode); front clear light and rear amber light flash together with intersector and speaker lights
  • Stop / Tail / Turn Lights: LED, halogen reverse lamps

Cabinets and Hardware

  • IV Holders: 4 recessed
  • Technician's Seat: Bench-style, vacuum formed upholstery
  • Cabinets: Sliding doors; adjustable shelves; sealed interior corners for easy clean-up; cabinet faces have picture-framed windows with mitered corners; tinted acrylic doors; full-length extruded aluminum pull handles; 5" rounded safety corners
  • Writing Tray: Versatile roll-out tray with storage for laptop computer or clipboards
  • Squad Bench: Seamless vacuum-formed cushions and upholstery, split lids with storage below; gas-prop style hold opens (lid automatically opens when latch is released); stainless steel paddle latches to hold the lids securely closed; seatbelts for seated and supine positions
  • Optional curbside action seat configurations available with 5-point safety harness, in lieu of a traditional squad bench - see representative for details

Oxygen/Vacuum

  • Oxygen and Vacuum Outlets: 2 Ohio-style oxygen outlets and one vacuum outlet
  • Oxygen Cylinder Mount: Adjustable stainless steel rings for M-size steel cylinder, located in the streetside front compartment
  • Vacuum and Suction System: Thomas brand vacuum pump in streetside intermediate compartment; on/off switch, flow regulator and disposable canister mounted on action wall



View Video: High | Medium
PD-146 Brochure
PD-146 Drawing - Crawl Thru
PD-146 Drawing - Pass Thru
PD-146 Drawing - Walk Thru
 
Registered Dealer for Southern California
For more information, contact

Mike Sutherland
mike.s@responsevehiclesolutions.com
Office: 818-780-6272
Cell: 818 939-1443