Professional Duty 168F | Type I
The PD-168 is a spacious, full sized custom ambulance. It is filled with the premium features you would expect, yet is customized to fit the needs of your agency.
Electrical
- Circuit Board: Printed circuit board with automatic reset circuit breakers; a complete set of relays and circuit breakers are mounted in the electrical cabinet as spares
- Heat / Cool: A combination heating and cooling unit installed over the walk-through or pass-through window with 3-position mode selector switch and thermostat on rear control panel (Optional severe climate thermal package available, ducted system also available)
- 3 - 115-volt hospital grade duplex outlets with GFI protection
- Shoreline: 115-volt 20amp twist-lock power inlet with watertight cover; with mating plug
- 2 - 12-volt power point-style outlets; Schottky diode to isolate medical equipment
- Multiplexed electrical systems are also available
Body
- Headroom: 72" floor to ceiling, with optional increased headroom available
- Flooring: Non-slip Lonplate II, with 5" roll-up
- Compartments: .100" bright aluminum diamond plate wall construction; .125" smooth aluminum floors
- Body Construction: Structural members are 2"x2"x.125" aluminum tubes at 12" on center for sidewall verticals, roof cross members, and floor cross members; sidewall skin is .125" aluminum sheet; roof skin is a .090" 1-piece aluminum sheet; floor vapor barrier is a .090" 1-piece aluminum sheet; doorjambs are formed integral in the sidewall
- Side Entry Stepwell: .125" ADP single step side entry stepwell
- Door Construction: One-piece, form rolled, compartment and entry doors with 24 bends to form a minimum 2.75" thick door. Tri-Mark heavy duty locking paddle handles with 2-point double latching on all compartment and entry doors
- Rear Bumper / Step: Steel subframe bumper, flip-up center section with high grip surface, cast aluminum endpods
- Rubrails: All aluminum C-channel style
- Rear Kickplate / Stone Guards: Brushed stainless steel
Emergency Lights
- Intersection Lights: 2 Whelen 700 series halogen lights with red lenses
- Front Lightbar: 58" with customer choice of lens colors
- Load Lights: 2 Opti-Scene 8°-32°
- Scene Lights: 4 Opti Scene 8°-32° lights
- Siren: 200-watt remote siren; 1 siren/horn selector switch
- Speakers and Lights: Speakers mounted under the bumper; 2 Whelen 700 Series halogen forward facing lights with red lenses
- Warning Lights: KKK-A-1822 lighting with matching flash pattern; 8 Whelen 900 Series halogen lights with red lenses; 1 Whelen 900 Series halogen light with clear lens (cancels in secondary mode); 1 Whelen 900 Series halogen light with amber lens (flashes in secondary mode); front clear light and rear amber light flash together with intersector and speaker lights
- Stop / Tail / Turn Lights: LED, halogen reverse lamps
Cabinets and Hardware
Oxygen/Vacuum
- Oxygen and Vacuum Outlets: 2 Ohio-style oxygen outlets and one vacuum outlet
- Oxygen Cylinder Mount: Adjustable stainless steel rings for M-size cylinder, located in the streetside front compartment
- Vacuum and Suction System: Thomas brand vacuum pump in streetside intermediate floor compartment; on/off vacuum switch, flow regulator and disposable canister mounted on action wall
|
| View Video: High | Medium |
| PD-168F Type I Drawing |
| |
Registered Dealer for Southern California
For more information, contact
Geoff Maze
geoff@responsevehiclesolutions.com
Office: 818-780-6272
Cell: 818-738-4584 |



|